The SITRANS F M MAG 5100 W with its patented liners of hard rubber NBR or ebonite and EPDM is a sensor for all water applications such as ground water, drinking water, waste water, sewage or sludge applications. 


In order to have a complete flowmeter, please combine it with one of the following MAG transmitters:

 SITRANS F M MAG 5000: Cost efficient transmitter, accuracy of + 0.4 % of flow rate

SITRANS F M MAG 6000: Bus communication, batch function and accuracy of + 0.2 % of flow rate

SITRANS F M MAG 6000 I: Alu enclosure, Ex approvals, bus communication, batch function and accuracy of + 0.2 % of flow rate

The sensor can be combined with the energy calculator SITRANS FUE950 


Application examples: Water abstraction, Water distribution network, Custody transfer water meters and Waste water


 Meassuring range 0 to 10 m/s
 Nominal Sizes From DN 25 to DN 2000 (1" to 78")
 Accuracy 0.2 % ±2.5 mm/s
 Operating Pressure Max. 16 bar (Max. 150 psi)
 Ambient temperature From -40 to 70 °C (-40 to 158 °F)
 Medium Tempreature From -10 to 70 °C (14 to 158 °F)


NBR hard rubber

Ebonite hard rubber

 Electrodes Hastelloy C-276

Built-in grounding electrodes
 Material Carbon steel, with corrosion resistant

two-component epoxy coating
 Drinking Water Approvals EPDM: WRAS, NSF/ANSI Standard 61, DVGW 270,

ACS and BelgAqua

NBR: NSF/ANSI Standard 61, WRAS

Ebonite: WRAS
 Custody Transfer Approvals OILM R 49

 General approval MCERTS Sira Certificate No. MC080136/00


  • Short lead time

  • Rugged NBR hard rubber liner for all water and wastewater applications

  • EPDM liner specifically for drinking water applications requiring special approvals

  • Ebonite liner for all drinking water, water and wastewater applications

  • Increased low flow accuracy for water leakage detection (NBR or EPDM liner)

  • Suitable for direct burial and constant flooding (IP68)

  • Designed to allow patented MAG in-situ verification using the SENSORPROM fingerprint

Reference :


Other Stock